Advertisement
This package contains small parts in
its unassembled state. Adult assembly
is required.
IMPORTANT! Please remove all parts from the package and identify
them before assembly. Some parts may be packed in the pad.
Head Snuggler
Allen Wrench
Parts
CAUTION
Seat Assembly
Pad
Soothing Unit
Crossbar
IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact
Fisher-Price
for replacement parts and instructions if needed.
®
Never substitute parts.
Seat Assembly
Foot Tube
1
• Lay the seat assembly face down on a flat surface.
• Locate the foot tube that is attached to the liner. Line up the
holes in each end of the foot tube with the holes in the side rails.
• Insert two M6-1 x 15mm screws through the holes on each end
of the foot tube and into each side rail. Tighten each screw with
the Allen wrench.
Head Tube
2
• Turn the assembly around. Locate the head tube that is attached
to the liner. Line up the holes in each end of the head tube with
the holes in the side rails.
• Insert an M6-1 x 15mm screw through the hole on each end of
the head tube and into each side rail. Tighten the screws with the
Allen wrench.
3
Assembly
Advertisement
