Dolby Laboratories CP650 User Manual

Hide thumbs Also See for CP650:

See also: User Manual , Installation Manual

Film-Tech

The information contained in this Adobe Acrobat pdf

file is provided at your own risk and good judgment.

These manuals are designed to facilitate the

exchange of information related to cinema

projection and film handling, with no warranties nor

obligations from the authors, for qualified field

service engineers.

If you are not a qualified technician, please make no

adjustments to anything you may read about in these

Adobe manual downloads.

www.film-tech.com

Table of Contents

Need help?

Do you have a question about the CP650 and is the answer not in the manual?

Page 1 Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema projection and film handling, with no warranties nor obligations from the authors, for qualified field service engineers.
Page 2 75 pF per meter. For two conductor with shield wiring, use Belden 8451 All shields must be connected to the CHASSIS of the CP650. 2-conductor shielded cable or equivalent: tinned copper, This achieves the required RF interference immunity. A metal...
Page 3 Subwoofer Notes: Follow all local electrical and building codes. All shields must be connected to the CHASSIS of the CP650. This achieves the required RF interference immunity. A metal Use grounded (earthed) conduit wherever possible. Avoid housing must be used for all D-connectors and the shields routing signal wiring near electric motors, rectifiers, power must be connected to the housing.