Care And Cleaning - Fisher & Paykel OB60 User Manual

Manual cleaning
ALWAYS
Before any manual cleaning or
●
maintenance, first wait for the oven to
cool down to a safe temperature to
touch, then turn its power supply off at
the wall.
Read these cleaning instructions and
●
the 'Safety and warnings' section before
you start cleaning your oven.
To prevent soiling from becoming
●
'baked on' and stubborn, we
recommend removing any easy-to-
reach spills, food or grease stains from
the oven cavity enamel after each use.
WHAT?
Glass surfaces
(oven door
panes, control
panel)
34

CARE AND CLEANING

HOW?
Door comprises a total of 3 glass panes
C
B
A
To clean glass pane B, you
●
will first need to remove the
door and the inner pane.
For instructions, see section
'Removing and replacing the
door glass panes for cleaning'.
1
Clean with a solution of mild
detergent and hot water. We
recommend using a soap
containing potassium hydroxide.
Wearing gloves, dampen the
soap bar and smear the soapy
mixture on the door glass. Leave
for 15 minutes then rinse with
clean water and wipe dry.
2 Wipe with a glass cleaner and
dry with a soft, lint-free cloth.
NEVER
Never use a steam cleaner.
●
Never store flammable substances in the
●
oven.
Never use abrasive or harsh cleaners,
●
cloths, scouring pads or steel wool.
Some nylon scourers may also scratch.
Check the label first.
Never use oven cleaner on catalytic
●
panels (some models only).
Never leave alkaline (salty spills) or
●
acidic substances (such as lemon juice
or vinegar) on the oven surfaces.
Never use cleaning products with a
●
chlorine or acidic base.
IMPORTANT!
●
inner
middle
outer
●
●
Don't use oven cleaners or
any other harsh/abrasive
cleaners, cloths, scouring
pads, steel wool or sharp
metal scrapers to clean
the glass surfaces. These
scratch the glass and may
damage its special coating,
which in turn could result
in the glass cracking or
shattering.
Even if you only clean the
inner pane (C), remove the
door and the pane first.
Cleaning the glass with the
pane in the door may result
in cleaning liquid running
down the gaps and drying
onto internal components.
Take particular care when
cleaning the control panel
glass. Only use a damp
cloth with detergent.