DFI EB3486-TN User Manual page 50

PUMA Station Board
This box allows you to add, remove or move boards.
System - DFI EB3486-TN EISA SYSTEM BOARD
Slot 1 - Empty
Slot 2 - Empty
Slot 3 - Empty
Slot 4 - Empty
Slot 5 - Empty
Slot 6 - Empty
Slot 7 - Empty
Slot 8 - Empty
- Press INSERT to add a board that was not deleted or has not been installed yet.
- Press DEL to remove the selected board.
- Press F7 to move the selected board to a different slot.
- Press Esc when finished with this step.
[Add=INSERT]
Add
This option allows you to add a new board to the
current configuration.
a. Press <Insert> to select the Add option and a screen
similar to the one shown below will appear.
Directory: A:\*.CFG
!DFI0300.CFG - DFI EB3486-TN EISA SYSTEM BOARD
!DFI1001.CFG - DFI EISANet - 500 EtherNet Adapter
!DFI0001.CFG - EISA SYSTEM BOARD
!DFI0200.CFG - EISA SYSTEM BOARD
[Select=ENTER]
6-5 u
EISA Configuration Utility
Step 2 - Add and Remove Boards
[Remove=DEL] [Move=F7] [Done=ESC] [HELP=F1]
Select the Board to Add
[Cancel=ESC] [Add ISA=INSERT]