Setting Tv Poweroncontrol; Displaying Tv Statusinformation - Toshiba 65L7300U User Manual

Basicfeatures 89
Setting TV Power On Control
Setting TV PowerOnControl
When the TV is connected to the home network via Wireless LAN with
the TV Power On Control in Enabled, your TV can be turned on by
control
from Apps.
1 Press the SETUP button.
2 Select
Options > Power
Management > TV Power On Control
and press the OK button.
3 Press the A/V (arrow) buttons to select Enabled (Active Standby).
NOTN .:. Depending o n thedeviceconnected t o thehomenetwork, i t maytakea
whilefortheTVto turnon.
•".. Depending o n thedeviceconnected t o thehomenetwork, t his feature
maynotwork.
•".. If theunencrypted W ireless Setupis done,this feature cannotbe
used.
•".. Thepowerconsumption duringActiveStandby is morethanit during
Normal S tandby.
•".. Afterthechange from PowerOnstatetoActiveStandby, theremaybea
periodof several seconds whentheTVdoesnot receive theoperation
from a remote controlor external apparatus.
Displaying TV statusinformation
To display TV status information, press the INFO button.
The following information will be displayed (if applicable):
o*.o Current input (ANT/CABLE, Video, etc.)
o*.o Either "CABLE" (for cable TV) or "ANT" (for over-the-air
broadcasts), if ANT/CABLE is the current input
o*.o Channel number (if in ANT/CABLE mode)
o*.o Input label (if set)
o*.o Digital signal strength indicator (for ATSC/QAM signals only)
o*.o Stereo, Mono, or SAP audio status (when in HDMI
TM
input mode,
PCM)
o*.o Video resolution
o*.o Aspect ratio ofincolning video signal (4:3 or 16:9)
o*.o V-Chip rating status (if available)
o*.o GameTilner (if set)
o*.o Channel Label (if set or received)