Connecting YourTV
3 5
Connecting a digitalaudiosystem
The TV's Digital Audio Out terminal outputs a Dolby _ Digital or
2-channel down-mixed PCM (pulse-code modulation) signal for using
with an external Dolby _ Digital decoder or other external audio systems
with optical audio input.
You will need an Optical audio cable (Use an optical audio cable that
has the larger "TosLink" connector and not the smaller "mini-optical"
connector.)
TV back panel
(S.mple
Illustration)
L 7300U Series--Connecting
a digital audio
system
Before controlling the audio, see "Selecting the optical audio output
format" on page 107.
NOTE
Someaudiosystems maynotbecompatible with DolbyDigitalbitstream
signals.Olderaudiosystems thatarenotcompatible withstandard optical
out signalsmaynotworkproperly, c reating a highnoiselevelthatmay
damage speakers or headphones. THISDAMAGE IS NOT COVERED B Y
YOUR WARRANTY. TheDIGITAL A UDIOOUT terminalmaynotoutputsome
digitalaudiosources because ofcopy restrictions.
•:. TheUolbyDigitalformatis available in thefollowingsituations:
- Whentunedto a digitalRFchannel
- Whenan HDMIinputis used
- Whennetworkdevices areused