Initial Setup and Menu
5 7
Performing the initial set
2
Select Media Renderer,
and select On or Off from the sub
lnenu.
When On is selected, the Media Renderer function can be
used.
3
Select Next.
6
Channel Tuning
Select Antenna or Cable, and select Start Scan.
Auto Tuning will start.
While scanning is in progress, the Auto Tuning Progress screen
appears.
NOTE
If youdo notwantto scanchannels, you do notneedto make a selection
for ChannelTuning.Select S kipto skipthis step.
NO'rN
If youwantto stop scanning, p ressing theEXITbuttonwhilescanning is in
process.
While scanning is in progress, the Auto Tuning Progress screen
appears.
After scanning is complete, the auto tuning results screen (such as
the one below) will appear.
2oi
I01-201
101.201
201
55
101-201
_
66
201
_
77
(Sample
Illustration)
Auto Tuning
Results
screen
Press the OK button.
NOTE
Theencrypted channels arenot listedon theautotuningresultscreen.