Mounting The Flexibleantenna; Installingthebeltclip - Uniden USC 2500XLT Operating Manual

To fully charge the battery, leave the Adaptor/Charger
connected for 14 to 16 hours. Note:
You can operate
the unit while the battery is charging.
3. When
charging is complete, disconnect the Adaptor/
Charger from the AC outlet and from the Battery Pack.
Note: Disconnect the AC Adaptor/Charger from the unit
during a power failure.
Mounting the Flexible Antenna
Place the end of the antenna onto the BNC connector on top
of the scanner and turn clockwise until tight.
Installing the Belt Clip
Place the Belt Clip slightly above the mounti:lg area on the
back of the scanner, and press downward and in.
~
14