Table of Contents
Advertisement
22
Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
1
Connect the CPU cooling fan cable to CPU_FAN.
2
Connect the system cooling fan connector to SYS_FAN.
3
Connect the power cooling fan connector to PWR_FAN.
4
Connect the case switches and indicator LEDs to the F_PANEL.
5
Connect the standard power supply connector to ATX_POWER.
5
Connect the case speaker cable to SPK.
6
Connect the connector for graphics interface to ATX4P.
7
Connect the auxiliary case power supply connector to ATX12V.
1. Connecting 24-pin power cable
The ATX 24-pin connector allows you to connect to ATX v2.x power supply.
24-pin power cable
With ATX v2.x power supply, users please note
that when installing 24-pin power cable, the
latches of power cable and the ATX_POWER
match perfectly.
Installing the Motherboard
Advertisement
Table of Contents
