LAZBOY D71 M80913 Owner's  Manual
LAZBOY D71 M80913 Owner's  Manual

LAZBOY D71 M80913 Owner's Manual

Sears austin 4pc seating set * trunk table

Advertisement

Quick Links

OWNER'S MANUAL
Sears Austin 4PC Seating Set
* Trunk Table
Product Code: D71 M80913
UPC Code: 7-22938-07965-0
Date of Purchase: __ / __ / __
If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
CALL OUR CUSTOMER SERVICE HOT-LINE AT
866-391-4868
8am-5pm (EST), Monday-Friday.
View the expanded assortment of outdoor living product on-line at
WWW.lazboyoutdoor.com
and
WWW.sears.com
Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D71 M80913 Owner's and is the answer not in the manual?

Questions and answers

Summary of Contents for LAZBOY D71 M80913 Owner's

  • Page 1 OWNER’S MANUAL Sears Austin 4PC Seating Set * Trunk Table Product Code: D71 M80913 UPC Code: 7-22938-07965-0 Date of Purchase: __ / __ / __ If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 866-391-4868 8am-5pm (EST), Monday-Friday.
  • Page 2 W A R R A N T Y This warranty is a limited warranty, and applies to the original purchase only. Proof of purchase is required. This is a residential warranty and does not apply to commercial use. This collection carries a 5 year limited warranty and is valid from original date of purchase to the original owner (proof of purchase required): NOTE: Glass breakage is not a warranted item.
  • Page 3: Parts List

    CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury! Assemble product on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. After final alignment, make sure all bolts and nuts are securely tightened with screw head covers pressed in place.
  • Page 4 inner side of back panel (A). See Figure 2. Figure 2 Step 3. Insert another 2 exposed bars on the center of bottom panel (C) into the 2 bar receiver holes on front panel (A), and attach the side panels (B) to front panel (A) with M6X15mm hex head bolts (E), steel washers (F).
  • Page 5 wrench (H), Cover all the bolts (E) with bolt caps (G). Now your trunk table is ready for your enjoyment. Page 5 of 5...

Table of Contents