KitchenAid KGSS907 Manual page 9

To Use the InstaWok
TM
Grate:
1. Check that the control knob is in the OFF position and the
grate is completely cool before handling.
2. Remove grate from cooktop and flip the grate over so that the
wok supports are pointing up.
A. Wok supports pointing up
B. Cooktop grate with InstaWok
TM
Grate
insert (left side of range only)
C. Reversible InstaWok
TM
Grate insert
3. Place the wok grate within the supports.
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner Cap .Alignment
Always keep the burner cap properly fitted in place when using a
surface burner. A clean burner cap will help avoid poor ignition
and uneven flames. Always clean the burner cap after a spillover
and routinely remove and clean the caps according to the
"General Cleaning" section.
TripleTier _ Flame Burner
,IIIIIIIIIIII:Z_:::I _, 0
CB ................................................................... E
D
A. TripleTier ¢ flame burner caps
B. Burner base
C. Alignment pins
D. Igniter
E. Gas tube opening
Standard Burner
_ ,,f_s / is_ D
...................... E
A. Burner cap
B. Burner base
C. Alignment pins
D. Igniter
E. Gas tube opening
Gas tube opening
Gas must flow freely throughout the gas tube opening for the
burner to light properly. Keep this area free of soil and do not
allow spills, food, cleaning agents or any other material to enter
the gas tube opening. Protect it from spillovers by always using a
burner cap.
Burner ports
Check burner flames occasionally for proper size and shape as
shown below. A good flame is blue in color, not yellow. Keep this
area free of soil and do not allow spills, food, cleaning agents or
any other material to enter the burner ports.
TripleTieK _Flame Burner
A. _" (19.1 mm)
B. _" (9.53 mm)
C. Burner ports
Standard Burner
B
A. 1-11/_'' (25-38 mm)
B. Burner ports