Advertisement
TV Connections
Make one of the following connec-
tions, depending on the capabilities of
your TV.
Video connection
Connect the MONITOR OUT jack on
1 1
the DVD/CD Receiver to the video in
jack on the TV using the video cable
supplied (V).
Connect the Left and Right AUDIO
2 2
OUT jacks of the DVD/CD Receiver
to the audio left/right in jacks on the
TV (A) using the audio cables.
S-Video connection
Connect the S-VIDEO OUT jack on
1 1
the DVD/CD receiver to the S-Video
in jack on the TV using the S-Video
cable (S).
Connect the Left and Right AUDIO
2 2
OUT jacks of the DVD/CD receiver
to the audio left/right in jacks on the
TV (A) using the audio cables.
Component Video (Color
Stream
®
) connection
Connect the COMPONENT VIDEO
1 1
OUT/PROGRESSIVE SCAN jacks
on the DVD/CD Receiver to the cor-
responding in jacks on the TV using
an Y Pb Pr cable (C).
Connect the Left and Right AUDIO
2 2
OUT jacks of the DVD/CD Receiver
to the audio left/right in jacks on the
TV (A) using the audio cables.
Progressive Scan (ColorStream
®
pro) connection
If your television is a high-definition or
"digital ready" television, you may take
advantage of the DVD/CD receiver's
progressive scan output for the highest
video resolution possible.
If your TV does not accept the
Progressive Scan format, the picture will
appear scrambled if you try Progressive
Scan on the DVD/CD receiver.
Connect the COMPONENT VIDEO
1 1
OUT/PROGRESSIVE SCAN jacks
on the DVD/CD Receiver to the cor-
responding in jacks on the TV using
an optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO
2 2
OUT jacks of the DVD/CD Receiver
to the audio left/right in jacks on the
TV (A) using the supplied audio
cables.
Front Speaker
(Right)
FRONT
R
Rear Speaker
(Right)
SUBWOOFER
To Wall Outlet
Before you connect this system to your TV,
be sure to turn off the power and unplug
both units from the wall power outlet before making
any connections.
Front Speaker
(Left)
Center
Speaker
REAR
SUB
CENTER
REAR
FRONT
R
WOOFER
L
L
Rear Speaker
(Left)
FM Wire Antenna
C
V
S
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
S-VIDEO IN
VIDEO IN
ANT IN
Speaker System Connections
Connect the speakers using the supplied
speaker cords by matching the colors of the
terminals and those of the cords. To obtain the
best possible surround sound, adjust the
speaker parameters (distance, level, etc.).
otes
Be sure to match the speaker cord to the
appropriate terminal on the components: 3
to 3 and # to #. If the cords are reversed,
the sound will be distorted and lack bass.
If you use front speakers with low maximum
input rating, adjust the volume carefully to
avoid excessive volume output to the speak-
ers.
Do not disassemble the front covers of supplied
speakers.
Radio Antenna Connections
Connect the supplied AM/FM antennas for
radio listening.
Connect the AM loop antenna to the AM
1 1
AM Loop Antenna
antenna connectors.
Connect the FM wire antenna to the FM
2 2
antenna connectors.
otes
To prevent noise pickup, keep the AM loop
antenna away from the DVD/CD receiver
and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it as horizontal and flat as possible.
Advertisement
