Table of Contents
Advertisement
Troubleshooting
Symptom
No Function in Reverse
Inconsistent Operation
Constant Tone in Reverse
Care
To prevent power wire harness damage, remove Hitch Unit and unplug all power wires prior to driving through
automatic car washes.
Keep sensors clear of any solid mass or debris to maintain accurate performance.
(For additional information, please contact your installation center.)
Remedy
Check power to receiver and transmitter
Reprogram Receiver
Check Fuse in Receiver
Check in-line fuse in Sensing Unit
Check 7-way harness
Check Ground Wire
Refer to page 4 Reprogramming Wireless
Receiver.
Always check for object behind vehicle
Make sure sensors are clean of debris
-5-
Advertisement
Table of Contents
