Table of Contents
Advertisement
Your purchase of the Hitch Mounted Wireless Reverse Obstacle Detection System will provide you with a state of
the art, highly sophisticated, ultrasonic obstacle detection device for your vehicle. It is manufactured to ISO
standards, and under normal circumstances requires little maintenance. Under no circumstances should you
attempt to open the Sensing Unit or RF Receiver. Doing so will void all manufacturer's warranties. (Step weight
should be limited to less than 250 pounds or 110kgs.)
Kit Contents:
Your Obstacle Detection Kit contains the following items:
(1) Sensing Unit, with 2-pin Power harness, (Fig.A)
(1) 7way Power Plug, with 18" 2-pin harness. (Fig.B)
(1) *Wireless RF Receiver. (Fig.C)
Factor Programmed to match A and C
(1) HitchLock with (2) keys. (Fig.D)
(2) Foam Stabilizers (Fig. F)
(2) Hitch Lock Spacers (Fig. G)
Fig.A
Congratulations
Fig.D
Fig.G
Fig.F
Fig.B
(1) 2 Pin Reverse Power Hard Wire Kit: (Fig.E)
(1) 2-pin plug with 9 foot wire harness
(2) 22-18awg Red ScotchLock
(6) 8" tie straps for securing wires
(1) inline mini blade fuse holder 2A
(2) spare blade fuses included
(2) butt splice red
(1) Installation Instruction Sheet
Fig.E
Fig.C
-2-
Advertisement
Table of Contents
