F Remove the bolts and store them in a clean
place.
F Remove the wheel.
Ensure that the jack is stable. If the
ground is slippery or loose, the jack
may slip or drop - Risk of injury!
Ensure that the jack is positioned only
at one of the jacking points A or B
under the vehicle, making sure that the
vehicle's contact surface is centred on
the head of the jack. Otherwise there is
a risk of damage to the vehicle and/or of
the jack dropping - Risk of injury!
Fitting a wheel
Practical information
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting, it
is normal to notice that the washers
do not come into contact with the
"space-saver" spare wheel. The wheel
is secured by the conical surface of
each bolt.
After changing a wheel
To correctly store the punctured wheel
in the boot (not in the location of the
space-saver wheel), first remove the
central cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop without delay.
Have the punctured wheel repaired
and refitted to the vehicle as soon as
possible.
7
269