Practical information
Repair procedure
1. Sealing
F Switch off the ignition.
F turn the selector A to the "sealant"
position.
F Check that the switch B is in
position "O".
Avoid removing any foreign bodies
which have penetrated into the tyre.
256
F uncoil the white pipe G fully.
F Unscrew the cap from the white pipe.
F Connect the white pipe to the valve of the
tyre to be repaired.
Take care, this product is harmful
(e.g. ethylene-glycol, colophony...) if
swallowed and causes irritation to the eyes.
Keep this product out of the reach of
children.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Start the vehicle and leave the engine
running.
Do not start the compressor before
connecting the white pipe to the tyre
valve: the sealant product would be
expelled through the pipe.