EEG EN 530 Instruction Manual page 36

FRONT PANEL CONTROLS & DISPLAY
Display
Power (On/Off)
Encoder ON
Reset
REAR PANEL CONNECTORS
SDI In
SDI Out 1
SDI Out 2
HD-SDI In (SD VANC)
HD-SDI Out 1 (SD VANC) BNC 75 Ohm connector, bypass protected
HD-SDI Out 2 (SD VANC) BNC 75 Ohm connector, not bypass protected
Data
Power
PHYSICAL CHARACTERISTICS
Height
Width
Depth
Mounting
Weight
Ambient Operating Temp
POWER REQUIREMENTS
Line Voltage
Line Frequency
Line Current
Input Power
Circuit Protection
EMI/RFI
OPTIONS
EN-SLIDE
EN-TCR
2 x 24 LCD, back-lit display showing unit operating conditions
Push-button switch with integral circuit breaker, white band indicates Off state
Push-button switch controls bypass state, LED lit for non-bypassed state
Flush momentary switch, resets the encoder
BNC connector, internal 75 Ohm termination
BNC 75 Ohm connector, bypass protected
BNC 75 Ohm connector, not bypass protected
BNC connector, internal 75 Ohm termination
Five RJ 11 Jacks for P1, P2, P3, Ma, and VTR Control
Standard IEC 60320 non-captive socket 3-wire North American power cord, 7 feet long
1.75 inches (4.4 cm)
19 inches (48.3 cm)
10 inches (25.4 cm)
Designed for rack mounting with or without chassis slides
9 lbs. (4.1kg)
0° C to 50° C
117 VAC 10%
50/60 Hz
0.3 A maximum
36 W
Internal to On/Off switch, 0.4 A
Complies with FCC Part 15 Class A, EU EMC Directive
Rack Slides
LTC Time Code Reader
©2000-2007 EEG Enterprises, Inc.
EN530 HDTV Smart Encoder IV
35