Encoder Status Commands - EEG EN 530 Instruction Manual

Encoder Status Commands

Report Identification <CTRL+A>? <ENTER>
Report HD Status
Report Port Activity
Modem Status
Recovery Status
SD Video Presence
Returns the Encoder's model, serial number, and firmware version.
<CTRL+A>f <ENTER>
Returns the Encoder's current HD operation setting (334M VANC Insertion,
333M VANC Recovery, or GA VANC Recovery) and the availability of an
HD video source (HD-SDI Present or HD-SDI Not Present). If an HD signal is
present, the video format of the source and whether or not VANC caption data
is present are also reported.
<CTRL+A>O <ENTER>
Returns a table displaying which ports last entered data for each data type. The
port that last entered data for each data type is marked with an A in the table.
The data types are primary language captioning (CF1), secondary language
captioning (CF2), primary text services (TF1), secondary text services (TF2),
and XDS.
<CTRL+A>+ [Modem] <ENTER>
Returns the status of the specified modem as either On Hook or Off Hook. The
Modem parameter need not be entered to view the status of MA, the built in
dial up modem.
<CTRL+A>A <ENTER>
Returns the data recovery status of each Line 21 channel for incoming SD
video. ON indicates that data on the channel is being recovered and processed.
OFF indicates that the channel has been turned off (see page 13) and incoming
data is being ignored.
<CTRL+A>b <ENTER>
Reports either Video Present or No Video Present to indicate whether or not
the Encoder is receiving an SD video signal.
©2000-2007 EEG Enterprises, Inc.
EN530 HDTV Smart Encoder IV
29