Mazda 2009 Mazda6 Owner's Manual page 308

Interior Comfort
Bluetooth Hands-Free
3. Prompt: "Enrollment is enabled/
disable. Would you like to disable/
enable or retrain?"
4. Say: [Beep] "Retrain"
5. Prompt: "This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hangup button to cancel at
any time."
6. Press the talk button (Short press).
7. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. "Please read
phrase 1")
8. Say: [Beep] "0123456789" (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
9. Prompt: "Speaker enrollment is
complete, returning to main menu."
NOTE
If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button (Short press).
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
l
correctly and naturally.
6-90
(For example, "1234" must be read out
"one, two, three, four", not "twelve, thirty
four".)
Do not read out parentheses. " (" and
l
hyphens "-" are used for separating
numbers in a phone number.
Ex.
" (888) 555-1212" must be spoken "Eight,
eight, eight, five, five, five, one, two, one,
two."
Phrase
1 0123456789
2 (888) 555-1212
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
NOTE
The applicable phrase appears in the
l
display.
After user voice registration is completed,
l
voice guidance "Speaker enrollment is
complete, returning to main menu" is
announced.
Voice recognition learning on/off
1. Activate Bluetooth Hands-Free (page
6-74).
2. Say: [Beep] "Voice training"
3. Prompt: "Enrollment is enabled/
disable. Would you like to disable/
enable or retrain?"
4. Say: [Beep] "Disable" or "Enable"
5. When "Disable" is spoken, the voice
recognition learning is turned off.
When "Enable" is spoken, the voice
recognition learning is turned on.
Command