Mazda 2009 Mazda6 Owner's Manual page 292

Interior Comfort
Bluetooth Hands-Free
Audio unit/Navigation system
The audio unit or navigation system is
used for adjusting the volume.
qVoice
To prevent the deterioration in voice
recognition rate and voice quality, the
following points must be observed:
It is not necessary to face the
l
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
Close the windows and/or the
l
moonroof to reduce loud noises from
outside the vehicle, or turn down the
airflow of the climate control system
while Bluetooth Hands-Free is being
used. Voice recognition may not
function correctly or voice quality may
deteriorate under the following
conditions.
A passenger is speaking.
l
Driving with the window and/or the
l
moonroof open.
Driving on bumpy roads.
l
Noise outside of the vehicle is loud.
l
(Construction sites, inside tunnels,
excess oncoming traffic, or heavy
rain.)
Operation noise from turn signals,
l
wipers, or the horn is heard.
A/C airflow is strong or wind is
l
blowing on the microphone.
There is noise coming from cargo
l
loaded in the vehicle.
Voice commands may not be
l
recognized depending on the voice. If
the voice commands are not recognized
correctly, repeat the commands in a
louder voice, at a natural pace, as if
speaking to another person.
6-74
Dialects or different wording other than
l
hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
Please be aware that the voice recognition
may error despite following the above
points.
qFunction Restrictions While
Using Bluetooth Hands-Free
Functions are limited as follows while
Bluetooth Hands-Free is being used.
Beep sound and voice guidance related
l
to the audio unit and navigation system
are not heard.
Beep sound related to the A/C
l
operation is not heard.
The navigation system's voice
l
recognition command does not
function.
qHow to Use This Section
Descriptions in the text are as follows:
Say: Voice commands to be spoken by
you.
Prompt: Voice guidance output from the
speaker.
A beep sound [Beep] is output from the
speaker. Speak after the beep sound is
heard.
Example)
Say: [Beep] "Dial"
Prompt: "Number, please"
Say: [Beep] "XXXXXXXXXXX (Ex.
"555-1234") (Telephone number)"
Bluetooth Hands-Free Activation
Method
Without the navigation system
Press the pick-up button or talk button
(Short press).