Mazda 2009 Mazda6 Owner's Manual page 295

Mazda 2009 mazda6 automobile owner's manual
Table of Contents

Advertisement

NOTE
A device can be programmed only when the
l
vehicle is parked.
If a Bluetooth device has already been
l
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
l
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
1. Activate the Bluetooth application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Activate Bluetooth Hands-Free (page
6-74).
3. Say: [Beep] "Setup"
4. Prompt: "Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player."
5. Say: [Beep] "Pairing options"
6. Prompt: "Select one of the following:
Pair, edit, delete, or list."
7. Say: [Beep] "Pair"
8. Prompt: "Please say a 4-digit pairing
code."
Bluetooth Hands-Free
9. Say: [Beep] "XXXX" (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
Record the code as it will be used to program
your device in Step 16.
10. Prompt: "Pairing code XXXX (4-
digit number). Is this correct?"
11. Say: [Beep] "Yes" or "No"
12. If "Yes", go to Step 13.
If "No", the procedure returns to Step
8.
13. Prompt: "Start pairing procedure on
the device. See the device manual for
instructions."
14. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select "Mazda" from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt: "Please say the name of the
device after the beep."
18. Say: [Beep] "XXXX - - -" (Speak a
"device tag", an arbitrary name for
the device.)
Example: "Stan's device."
NOTE
Speak a programmed "device tag" within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar "device tag".
Interior Comfort
6-77

Advertisement

Table of Contents
loading

Table of Contents