Reset The Unit - VIETA VC-HC800BT User Manual

Remove Memory Card
Press the unit in off. Press the card until you hear
a click sound, the card is now disengaged. then
remove the card.
CONNECT THE AUX-IN
Connect the external signal to AUX in jack located
atthe front of the panel, then press Mode button to
select Aux mode. Press Mode Button again to cancel
Aux Mode and return to previous mode.

RESET THE UNIT

You can reset the unit to its default setting.
The RESET button is located on the main unit (as
shown on the diagram). To press it vertically with a
ballpoint pen or metal object will activate it.
The reset button is to be activated for the following
reasons:
1. Initial installation of the unit when all wiring is
completed.
2. All the function buttons do not operate.
3. Error symbol on the display.
18
Right Track
Ground
BLUETOOTH HANDS FREE & A2DP
STREAMING OPERATION
You can make or receive phone calls with Bluetooth-
enabled phones through the unit. You can also listen to
music from an A2DP Bluetooth-enabled device.
Pairing a Bluetooth Device
Before using the Bluetooth device, you need to pair
the device to the unit.
Pairing needs only to be done once.
1. Open your mobile phone and switch bluetooth on.
2. Search for other bluetooth device with your device.
3. Select "TF2310" in the pairing list.
4. Input the password "0000" ( if password input is
needed ).
5. [CONNECTED] with mobile phone number or
handphone name will be displayed on the LCD
display if pairing is successful, and the paired device
will connect to the car audio system automatically.
Disconnect the Bluetooth Device
1. Press MENU to enter into the system menu mode.
2. Once the [DISCONN ] is displayed, press POWER/
MUTE to activate the manual Disconnect mode.
Reconnect the Bluetooth Device
1. The phone should reconnect automatically every
time you use the system.
2. If not, Press MENU to enter into the system menu
mode. Once the [CONNECT >] is displayed, press
POWER/MUTE to manually Reconnect the phone.
Making a Call
You can dial number using the mobile phone.
1 Use the Mobile Phone to dial and make an outgoing
call.
2 Once you have completed dialing, [CALLING] is
displayed.
To redial a number
1. Press on front panel, [REDAIL ] is displayed.
2 Press POWER/MUTE, unit will display [CALLING],
and the unit starts dialing the previous number.
NOTE: To make an outgoing call on this unit, the
Bluetooth connection between the unit and the
phone must be active.
CD/USB/SD Bluetooth Radio