Remove The Unit; Wiring Diagram - VIETA VC-HC800BT User Manual

INSTALLATION
The following illustration
shows a typical installation.
If you have any
questions or require
information regarding
installation kits, consult
your
customer car audio dealer
or a company suppling kits.
If you are not sure how to
install this unit correctly,
have it installed by a
qualified technician.

Remove the unit

1. Press the Panel Release button.
2. Push the left side of the panel rightward
3. Pull the panel towards you to disengage it from the
chassis.
CONNECTING THE SYSTEM

Wiring Diagram

14
To attach the front panel back to the unit chassis,
please insert the right side of the panel in the chassis
until it is correctly engaged. Press the left side of the
panel until the mechanism locks it into place.
4
Control
Panel
2
3
Tr im
Plate
2
1
ISO CONNECTOR WIRING CHART
PIN WIRE COLOR
A4 YELLOW
A5 BLUE
A7 RED
A8 BLACK
B1 VIOLET
B2 VIOLET/BLACK
B3 GREY
B4 GREY/BLACK
B5 WHITE
B6 WHITE/BLACK
B7 GREEN
B8 GREEN/BLACK
1
5 3
m m
Screw
Dashboard
Sleeve
Bend the appropriate
tabs to hold the sleeve
firmly in place.
FUNCTION/LABEL
BATTERY(+)
CONNECT TO SYSTEM
CONTROL TERMINAL OF
THE POWER AMP OR
AUTO ANTENNA RELAY
CONTROL TERMINAL
(max 150mA 12VDC)
IGNITION(ACC)
GROUND
RIGHT REAR SPEAKER (+)
RIGHT REAR SPEAKER (-)
RIGHT FRONT SPEAKER (+)
RIGHT FRONT SPEAKER (-)
LEFT FRONT SPEAKER (+)
LEFT FRONT SPEAKER (-)
LEFT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)
CD/USB/SD Bluetooth Radio