Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dynalink WLG25PCI
Summary of Contents for Dynalink WLG25PCI
-
Page 1: Quick Setup Guide
WLAN PCI Adaptor Quick Setup Guide WLG25PCI This Quick Set-Up Guide provides you with the basic instructions for setting up the wireless adaptor on your computer. The complete User Manual that includes an illustrated step-by-step guide can be found on the provided CD. - Page 2 Introduction A Wireless Local Area Network (WLAN) serves the same purposes as a conventional wired Ethernet network (LAN) but only without the wires. Computers are linked together by radio waves. The wireless adaptor is your “wireless network card”. It turns your computer into a wireless station, allowing it to connect to other wireless stations or wireless access points to share network resources including Internet access.
- Page 3 If you are reading this Quick Set-Up Guide from the supplied CD, return to the previous menu and click the Driver & Utility button. Otherwise, load the supplied CD and go the WLG25PCI product page and click the Driver & Utility button. Double click on RaLink2_RT2500.exe to run the install wizard.
-
Page 4: Connecting To A Wireless Network
If asked to select your location country, click on the drop down box to select Australia or New Zealand. 10.Click Finish when the completion screen appears. Depending on your operating system, Windows may ask to restart. Connecting to a wireless network WINDOWS XP USERS ONLY Windows XP comes with a built in Zero Configuration Utility for wireless configuration and monitoring. - Page 5 WLAN PCI Adaptor Quick Set-up Guide Highlight the access point you wish to joint, click Connect. If the network uses encryption, you will be asked to enter the key. Obtain the key from the system administrator and enter into the WPA Preshared Key box. Click OK.
- Page 6 From this point on, you only need to use the Windows default utility. Double click the icon. Windows will scan and list all available access points. Caution - access points with hidden SSID are not shown. Double click the access point you wish to join.
-
Page 7: Other Network Settings
WLAN PCI Adaptor Quick Set-up Guide Other network settings If the network you wish to join is WEP enabled, you will have to configure for WEP. The WEP setting is already determined on the network by the network administrator. Before you start you should have obtained: The type of encryption, 64 or 128-bit. -
Page 8: Permanent Removal
Uninstalling the adaptor, driver and utility PERMANENT REMOVAL The correct procedure is to uninstall the software first. You will then be advised to physically remove the adaptor. To uninstall: Close all programs that are currently running. Click the Windows Start button, point to All Programs > RaLink > RT2500 and select Uninstall. - Page 9 WLAN PCI Adaptor Quick Set-up Guide If the adaptor is already installed, click Start > Run. Enter cmd and click OK. In the DOS window, type in ipconfig /all. Under Ethernet Adapter Wireless Network Connection, the MAC address is displayed as physical address in a group of 6 double digits.
-
Page 10: Warranty
Return delivery after repair will be paid for by Dynalink. We reserve the right not to repair or replace goods that: have been mishandled, abused or not installed according to the guidelines as outlined in the instructions.
Need help?
Do you have a question about the WLG25PCI and is the answer not in the manual?
Questions and answers