Rollers; Water Supply To Icemaker - GE Side by Side 22 Use And Care Manual

PmPAmTIoN
(continued)
Adjustablerollers behind the base grille
enableyouto Whenadjusting frontrollers
movetherefrigerator a wayfromthewallforcleaning. forproperdoorclosure,we
Theserollersshouldbe setsotherefrigerator r ests recommend thatthebottom
firmlyon thefloor.Toassurethatthedoorswillclose frontedgeof thecabinetbe
automatically f roma halfway-open p osition, t hereis a approximately 5 /8"fromthe
built-in tilt from the
fronttothe-backof thecabinet.
Side-by-side r efrigerators a lsohavespecially designed
doorhingesthatliftbothdoorsslightlywhenopened,
allowingtheforceof gravityto helpclosethemsecurely.
To adjust rollers, remove
the base grilleby grasping
it at the bottomand pulling
it out.
mrn roller adjusting
screws clockwiseto raise
refrigerator, counterclockwise to lower it.
Use
adjustable wrench (3/8"
hex head bolt)or pliers.
To replacebase
grille,alignprongs
onbackof grille
withclampsin
cabinetandpush
forwarduntilgrille
snapsintoplace.
water
supply
to
Icemaker
You will need to connect your icemaker to a cold water line.
A watersupplykit containingcopper
tubing,shut-offvalve,fittingsand instructionsis availableat extracost fromyour dealer.There
shouldbe sufficienttubingfor the icemakerfrom the coldwatersupplyto allowyou to movethe
refrigeratorout from the wall severalfeet (approximately 8 feet of 1/4"coppertubingin three
10-inchdiametercoils.)