GE Side by Side 22 Use And Care Manual page 6

If you use yourrefrigeratorbefore
the water connectionis made,raise
the ice accessdoor and makesure
the icemakerfeeler armis in the
STOP (up)position.
arm in
(up)
position
in
position
When the water supplyhas been connectedto the
icemaker,movethe feelerarm to ON (down)position.
Pressthedispenserpadfor about2 minutesto
removetrappedair fromthewaterlineandto fillthe
watersystem.
The ice cubemold,automatically fills withwater after
coolingto freezingtemperatures. F irstcubesnormally
freezeafter severalhours.
NOTE: Witha newly-installed refrigerator, a llow
about24 hoursfor the freezercompartment t o cool
downto the properice-makingtemperature.
once
Y our Icemaker and Dispenser are
inoperation
Throw awaythe first few batchesof ice cubes (16 or
24 cubes).This will flush away any impuritiesin the
water line.Do ths samething after vacationsor
extendedperiodswhen ice isn't used.
Tocleanouttheline,pourthe fiist 6 glassfulsof water
in the kitchensink.Thefwstwaterthroughthe system
picksup a slight"plastic"tastefromthewatertubing.
To
m~e
sum
the
bin
fallswith ice,
level the cubes
occ=ion~y. men cubesfall intothebin theymaypile
up closeto theicemakerandpushthefeelerarmto the
STOPpositionbeforethebin getsfull.Keepingthe
cubeslevelallowstheicemakerto fill thebin.
To Dispense Ice and
water
~Set the selectorswitchto CUBES,
CRUSHEDICE (on somemodels)or WA~R.
Dispenser
pad
Dispenser
pad
~Grip the glass or otier containernear the rim and
press the rim againstthe centerof the dispenserpad.
—
—