Table of Contents
Advertisement
Getting to Know Your Park Avenue
10
Lamp Controls
Interior Lamps
See Section 3 of your Owner Manual for
interior lamp operating instructions.
Daytime Running Lamps
The Daytime Running Lamps will come
on when the ignition is ON, the head-
lamp switch is OFF, and the transaxle is
not in Park (P).
Twilight Sentinel
This feature automatically switches the
headlamps on and off by sensing how
dark it is outside. You should not have to
manually turn the headlamps on or off.
To use Twilight Sentinel, slide the
control from OFF to MAX to adjust the
headlamps' ON time from a few seconds
to 3 minutes, after the ignition has been
turned OFF.
Perimeter Lighting
Notice: Driver #1 and Driver #2 key
fob settings are unique. Refer to DIC
Programming on p.17.
The headlamps, parking lamps and
backup lamps will illuminate when you
press
on the keyfob transmitter.
See Section 3 of your Owner Manual.
Turn Signal/Multifunction Lever
Windshield Wiper Controls
MIST
Turn the WIPER band toward you and
release it for a single wipe cycle. For
more cycles, hold the band on MIST
longer.
WASH
Push the washer PUSH tab to spray
washer solvent on the windshield.
Advertisement
Table of Contents
