Display Backlight; Software Version; Time Format - Sangean PR-D4 User Manual

Display backlight

Press any buttons will illuminate the LCD display for approx.
10 seconds. During scanning stations and alarm activated,
will also automatically illuminate the display.

Software version

The software display cannot be altered and is just for your reference.
1. Turn off the radio.
2. Press the Band/ step button for 2 seconds until the software
version number (e.g. P01) shown on the display.

Time format

3. Continue pressing the Band/ step button until '24H' or '12H' shown
on the display followed by a beep.
4. Press the Tuning up/ down button to choose the desired selection
and press the Band/ step button to confirm the setting.
FM range setting
5. After the time format is completed, the display will automatically
change to FM range setting. Press the Tuning up/ down button to
choose the desired selection and press the Band/ step button to
confirm the setting. Options for FM range are as following:
F00 : 87.5-108 MHz
F01: 76-90 MHz
F02: 76-108 MHz
11