Sangean PR-D4 User Manual page 10

b. When the alarm sounds
6.To cancel a sounding alarm, press the Standby button to cancel a
sounding alarm.
c. Disabling / cancelling alarm setting
7.To cancel the radio alarm setting, press and hold the radio alarm
button for 2 seconds (followed by a beep) before the alarm
sounds off.
Note:
If new radio alarm station is not selected, it will select the last alarm
station.
Setting the HWS (Humane Wake System)
buzzer alarm
A beep tone will activate when selecting the HWS alarm.
The alarm beep will increase in volume every 15 seconds for one
minute followed by one minute silence before repeating the cycle.
The HWS alarm will sound for one hour until turning off by pressing
the Power button. Press the Power button whilst the alarm is
activated will cancel the alarm for 24 hours.
a. Setting the buzzer alarm
1. The buzzer alarm can be set when radio is on or off.
2. Press and hold the buzzer alarm button until the buzzer alarm
symbol flashes on the display followed by a beep.
3. Press the Tuning up/ down button to select the desired hour and
press the Time setting button to confirm hour setting.
4. Press the Tuning up/ down button to select the desired minute and
press the Time setting button to confirm minute setting.
Buzzer alarm setting is now completed.
9