Proxy Server Configuration For Use With Mpc, Vkc And Akc - Raritan Dominion KSX II User Manual

Proxy Server Configuration for Use with MPC, VKC and AKC

To edit a favorite:
1. From the Favorites List page, select the checkbox next to the
appropriate KSX II device.
2. Click Edit. The Edit page appears.
3. Update the fields as necessary:

Description

IP Address/Host Name - Type the IP address of the KSX II
device

Port (if necessary)

Product Type
4. Click OK.
To delete a favorite:
Important: Exercise caution in the removal of favorites. You are not
prompted to confirm their deletion.
1. Select the checkbox next to the appropriate KSX II device.
2. Click Delete. The favorite is removed from your list of favorites.
Logging Out
To quit the KSX II:

Click Logout in the upper right-hand corner of the page.
Note: Logging out also closes any open Virtual KVM Client and serial
client sessions.
When the use of a Proxy Server is required, a SOCKS proxy must also
be provided and configured on the remote client PC.
Note: If the installed proxy server is only capable of the HTTP proxy
protocol, you cannot connect.
To configure the SOCKS proxy:
1. On the client, select Control Panel > Internet Options.
a. On the Connections tab, click 'LAN settings'. The Local Area
Network (LAN) Settings dialog opens.
b. Select 'Use a proxy server for your LAN'.
c. Click Advanced. The Proxy Settings dialog opens.
Chapter 3: Working with Target Servers
55