GE 14 Owner's Manual page 10

About the freezer compartment shelves.
Some models have an ice-tray shelf and some have a full-width step shelf.
1
10
Ice-Tray Shelf
Plug Supports
To remove the ice-tray shelf: Lift the left side of the shelf
off its supports, then pull the shelf to the left to free it of
the plug supports. Pull the shelf to the right to free the
pins from the holes in the cabinet wall.
Step Shelf
To remove the step shelf:
1 Lift left side of shelf slightly.
2 Move shelf to the left to free its right ends from
2
holes in the cabinet wall.
3 Lower right side of shelf, move shelf to the right and
take it out.
To replace the step shelf:
1 With shelf tilted as shown, fit left ends of shelf into
holes in cabinet wall.
2
Lift left side of shelf slightly, swing shelf up, fit right
ends of shelf into holes in cabinet wall, and lower
shelf into place.
Ice Trays
To release cubes, turn the tray upside down, hold it over
a container, and twist both ends.
For only one or two ice cubes, leave the tray right-side
up, twist both ends slightly, and remove as many cubes
as you want.
Wash ice trays in lukewarm water only—do not put them in an
automatic dishwasher.