Real Time Tracking
To do real time tracking to car, and get location info, map link or detail address.
Command
CHK#******
(live track)
MAP#******
(Google map link inquiry)
ADD#******
(Detail address inquiry)
Alert Setting
To set multiple alerts and notification No. When alert actives, alert message will be sent to these numbers.
Command
SOSF,T1,T2,T3#******
(Alert Notificiation No)
SDx#******
(Overspeed alert)
MOVx#******
(Movement alert)
CPAx#******
(Power cut alert)
IN;Lat;lon;radius#******
(Arriving fence alert)
OUT;Lat;lon;radius#******
(Leaving fence alert)
ONER GPS Vehicle Tracker
User Manual
Description
To get current location info.******=000000
Reply:
ID=21451100,ACC=ON, 23.163678N,113.313711E,
0.0KM/H,10KM,2015.08.11 08:05
Command(no password): CHK
To get map link of current location .******=000000
Reply:
http://maps.google.com/maps?f=q&hl=en&q=6.46022,3.314953
&ie=UTF8&z=16&iwloc=addr&om=1
Command(no password): MAP
To get detail address, first need to set device to work
in the tracking system.
******=000000. I.E.: ADD#000000
Command(no password):ADD
Description
When Alert active, alert message will be sent to these No. .
******=000000. T1,T2,T3=phone No,max 16 digits
F=0, close (default), F=1,active;when set 1 number
only, others enter 0,I.E.:SOS1,087234551,0,0#000000
Command (no password)
when car is moving over the speed limit, alert active
******=000000 . x=0 close , x=30-200km/h
I.E.: SD80#0000000, Speed limit: 80KM/H
Command (no password) SDx
Set area (current location as central point, set radius),
When the car leaves this area, alert active.
******=000000. x=0,close; x=1, 30m;
x=3,100m x=4, 200m; x=5, 300m;x=6, 500m;
x=7, 1000m;x=8, 2000m
I.E.: MOV3#000000 Command(no password)
When external power is cut, alert active.
******=000000.x=0, close (default),x=1,active;
I.E.:CPA1#000000 Command(no password) CPAx
Set central point and raduis as fence, when enter this fence,
alert active. ******=000000, lat=latitude,lon=longitude,
radius=0-999KM. I.E.:IN;113.62637;23.22361;1#000000
Command(no password) IN;lat;lon;radius
Set central point and raduis as fence, when leaves this
fence, alert active. ******=000000, lat=latitude,lon=longitude
radius=0-999KM. I.E.:OUT;113.62637;23.22361;1#000000
Command(no password) OUT;lat;lon;radius
Command List
SOSF,T1,T2,T3
x=2, 50m;
MOVx
8