Table of Contents
Advertisement
4
Command List
RFID Setting
Online Tracking Parameter setting
Real Time Tracking
Alert Setting
Vehicle Controls
Other Functions
Important Info：
1. Commands should be sent one by one, the next one can be sent after getting reply
from previous command.
2. Command format can not be modified, no space between letter and number,"W"must be in CAPS
format.
3.******=000000(default password)
RFID Setting
Command
W******,BTL
(switch baudrate)
W******,RFID,X
(RFID Mode)
W******，ICSET,X
（IC setting）
Online Tracking Parameter Setting
To set parameter, add it to the system, and you can do online tracking.
Command
W******,010,ID
(Set ID)
W******,011,APN,username,password Get APN from sim card provider,if no username& password,
(Set APN)
W******,012,IP,Port
(Set IP,Port)
W******,013,X
(Set GPRS)
W******,014,XXXXX
(Set time interval)
W******,045,X (option)
(set distance interval）
ONER GPS Vehicle Tracker
User Manual
Description
Switch baudrate from 115200 to 9600, and then you can
use RFID. ******=000000
I.E.: W000000,BTL
To active RFID.
******=000000. X=0, inactive (default)， X=1， active
I.E.: W000000,RFID,1
To set IC card numbers to device, after sending this
command, LED light of RFID will be stand by, you can
start to swipe cards to set number to device.
******=000000. X=0， close（default）X=1,active
I.E.: W000000,ICSET,1
Description
******=000000
ID=SIM card No.,no country code，max 15 digits
I.E.:W000000,010,08451220
just put APN. ******=000000
I.E.: W000000,011,web.gprs.mtnnigeria.net,web,web
******=000000
IP=115.126.3.75， Port=9509 (onergps)
IP=115.126.3.15, Port=9999 (24h-tracking)
I.E.:W000000,012,115.126.3.75,9059
******=000000
X=0 close(default)，X=1 activeTCP, X=2,active UDP
I.E.:W000000,013,1
******=000000 XXXXX=00000,close(default)
XXXXX=00001-65535，unit:10sec
I.E.:W000000,014,00006 interval: 60sec
******=000000. X=0,close(default)
X=1-65535meter. I.E.：W000000,045,100
Command list
7
Advertisement
Table of Contents
