Crestron TPS-4L Operations & Installation Manual page 7

®
Crestron Isys TPS-4L
Operations & Installation Guide – DOC. 6449A
TPS-4L Specifications (Continued)
SPECIFICATION
Processor
CPU
Memory
DRAM
Flash
Maximum Project Size
Graphic engine
Ethernet
Audio
Hardware Feature
Audio Feedback
(WAV)
Amplification
Power
Cresnet Power Usage
Default Net ID
Firmware
Minimum 2-Series Control
1, 2, 3
System Update File
Environmental
Temperature
Humidity
Enclosure
Construction
Faceplate
Dimensions
Height
Width
Depth
Weight
1. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
3. When loading VisionTools Pro-e files or firmware through the RS-232 port of the control system, be
sure that the baud rate is at 38400 (Cresnet speed) or lower. Otherwise, Toolbox may post the
"Transfer Failed" message.
3.6-Inch Wall Mount Touchpanel
DETAILS
32-bit Freescale ColdFire® Microprocessor
16 MB
8 MB
7 MB
Isys engine; 16-bit non-palette graphics; 65,536
colors; synapse image rendering algorithm,
multi-mode objects, dynamic graphics, PNG
translucency, full-motion (60 fps) animation
10BaseT/100BaseTX, auto-switching,
auto-negotiating, full/half duplex, TCP/IP, UDP/IP,
CIP, DHCP, IEEE 802.3U compliant
Built-in amplified speaker (rear), internal volume
control
8-bit PCM, mono, 8 kHz sampling rate
1 Watt for built-in speaker
5 Watts (0.21 Amp @ 24 Volts DC)
03
tps-4l_c2n-ft-tps-4_qm-ftcc-tps_tps-4_2.007.0163
or later
Version 3.137.CUZ or later
32º to 104ºF (0º to 40ºC)
10% to 90% RH (non-condensing)
Injection-molded plastic, flush-mountable using
clips provided (additional mounting kits available)
Injection-molded plastic
4.54 in (11.52 cm)
6.19 in (15.72 cm)
2.13 in (5.40 cm)
15 oz (0.43 kg)
3.6-Inch Wall Mount Touchpanel: TPS-4L • 3