Installation Kit; Installation Procedures; Tools Required - Intermec 6820 Installation Instructions Manual

Installation Kit

Installation Procedures

Tools Required

6820 Printer Installation Instructions
Note: These instruction are required to install the following kit numbers:
203-242-101 (Fixed Mount and Wall Mount Printers)
203-242-102 (Portable Printers)
The 6820 Printer and associated electrical wiring should be installed under
the supervision of properly trained and qualified personnel. Follow these
installation instructions to ensure safe, reliable performance of the 6820
Printer.
When the installation is complete, you will have a secure place to store the
printer and hand-held or mobile computer. The vehicle electrical system
provides power to operate the printer and vehicle dock; and to charge the
printer internal battery.
In this installation, the power cable is wired directly to the vehicle battery.
This reduces installation problems and uses the vehicle battery filtering.
The installation kits contain nuts, bolts, washers, a terminal ring, and a fuse
link (on direct to battery installations) for connecting the battery cable
directly to the vehicle battery. These kits also contain adjustable wire clamps
to secure the cable in place.
This section leads you through these three installation steps:
1 Electrical installation (battery cable).
2 Mechanical installation (printer).
3 Final assembly and cable connection.
You should have a wire crimping and stripping tool, an electric drill with 3/
16" and 9/16" drill bits, and common hand tools.
1