Basic Fax Operation - Muratec MFX-C3035 Quick Manual

Fax operations

Basic fax operation

This section contains information on the general operation for faxing.
1
Press [Fax] or press the [Fax] key to display the initial Fax screen.
2
Place the document in the ADF or on the original glass.
3
Specify the destination.
–
If fax numbers have already been registered, a registered destination can be selected.
–
When directly entering the fax number, use the keypad to type in the number.
–
A document can be sent to multiple destinations at the same time (broadcast transmission).
–
In the initial Fax screen, press [Mode Check] to check or change the specified destination.
4
Press [Settings], and then select the appropriate settings on the [Scan Settings], [Comm. Settings], and [Origi-
nal Settings] screens.
5
Press the [Start] key.
After all document pages have been scanned, the fax is sent
The fax is sent in black and white regardless of whether the [Start (Color)] key or the [Start (B&W)] key is
pressed.
This machine cannot automatically detect the size of an original document that will be scanned. Before
scanning the document, specify its size. If the size of the original document is not correctly specified, some
parts of the image may be lost.
For details, refer to chapter 3, "Sending faxes", of the [Facsimile User's Guide].
6-2 Fax operations