Table of Contents Table of Contents 1. Before You Begin ............................1 What Is Included ................................1 Claims ......................................1 Manual Conventions ..................................1 Symbols ....................................... 1 Safety Notes ................................. 2 Personal Safety .................................... 2 Mounting And Rigging .................................. 2 Power And Wiring ..................................
Page 4
Table of Contents 5. Technical Information ..........................8 Product Maintenance ..............................8 Cleaning the Reflector Housing Lens ............................8 6. Technical Specifications ........................... 9 Returns ..................................10 Contact Us ..............................10 -ii- OVATION™ Min-E-10WW User Manual Rev. 2...
If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained Chauvet certified technicians. Do not open the housing or attempt any repairs.
Introduction 2. I NTRODUCTION The OVATION™ Min-E-10WW is a compact warm white LED ellipsoidal product. The Description OVATION™ Min-E-10WW features standard beam shaping shutters, a gobo/effect slot, lens barrels that are interchangeable, and the capability to run on standard theater dimmers as well as 0–10 VDC dimmers.
Technical Specifications chart in this manual. The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the Chauvet website: http://www.chauvetlighting.com/download/. · Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
The OVATION™ Min-E-10WW comes with a yoke to which you can either attach a mounting Procedure clamp for hanging. You must supply your own mounting clamp. Make sure the clamp is capable of supporting the weight of this product. For our Chauvet line of mounting clamps, go to http://trusst.com/products/. Safety Cable...
Operation 4. O PERATION The barrel is the section of the OVATION™ Min-E-10WW where the gobo holder slot and Barrel framing shutters are. The lens tube is also attached here. The OVATION™ ED-190WW allows manual rotation of the barrel assembly, as follows. Rotating the 1.
Technical Information 5. T ECHNICAL NFORMATION To maintain optimum performance and minimize wear, you should clean this product frequently. Product Usage and environment are contributing factors in determining the cleaning frequency. Maintenance As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating.
Technical Specifications 6. T ECHNICAL PECIFICATIONS Dimensions and Length Width Height Weight Weight 8.9 in (225 mm) 4.3 in (108 mm) 9.1 in (232 mm) 3.0 lb (1.4 kg) (product only) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range...
Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA number. DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.