ZyXEL Communications P-660HW-Tx v3 Support Notes page 90

Step 2: Set up WEP Key in the Web Configurator. You need to set the one of
the following parameters:
64-bit WEP key (secret key) with 5 characters
o
o 64-bit WEP key (secret key) with 10 hexadecimal digits
o 128-bit WEP key (secret key) with 13 characters
128-bit WEP key (secret key) with 26 hexadecimal digits
o
256-bit WEP key (secret key) with 29 characters
o
256-bit WEP key (secret key) with 58 hexadecimal digits
o
There are two ways you can configure the WEP Key.
(1) You can put in a special WEP key in the „WEP Key‟ menu directly.
All contents copyright © 2008 ZyXEL Communications Corporation.
P-660HW-Tx v3 Series Support Notes
90