Dry Operation - Frigidaire FRS123LS1 Use & Care Manual

DRY operation

The dry mode will automatically
select the drying operation based on
the difference between the set
temperature and the actual room
temperature.
The temperature is regulated while
dehumidifying by repeating turning
on and off of the cooling operation
or fan only. The fan speed is mainly
LOW.
1. Press the MODE button to select
DRY.
2. Press the TEMP button to set the
desired temperature from 70ºF to
82ºF.
3. Press the ON/OFF button, the
operation lamp lights and the air
conditioner starts to operate in the
DRY mode. FAN SPEED is Low.
Push the ON/OFF button again to
stop this unit operation.
Air flow direction adjustment
Use SWING button to adjust the airflow direction up and down.
When SWING button is pressed, the horizontal louver moves up and
down automatically. Press again to stop operation.
Attention
If the louver oscillates or moves in a position that could affect the cooling or
heating(only for models with heating function) of the air conditioner, the direction
of the oscillation/movement would alter automatically.
Attention
Due to the difference between the set
temperature of the unit and the actual
indoor temperature, the Air Conditioner
in DRY mode will automatically switch
the operation modes between COOL
and FAN ONLY many times.
.
Room
Temperature
How the air conditioner works
Time
Set temperature
DRY FUNCTION
38