Advanced Chipset Setup - ECS A760GM-M3 User Manual

1st/2nd/3rd Boot Device (Hard Drive/CD/DVD/Removable Dev.)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Boot Other Device (Yes)
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the First, Second and Third
boot devices.
Press <Esc> to return to the main menu setting page.

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Share Memory Auto Detection
Init Display First
DCT Unganged Mode
HDMI Audio
: Move Enter : Select
< >
F1: General Help
Share Memory Auto Detection (Enabled)
Disable this item to set the Share Memory Size. And if the item is set to Auto, Share
Memory Size can be controlled according to the dram size. When the dram size is
less than 512 MB, Share Memory Size should be set to 64 MB. While between 512
MB and 1 GB, it should be set to 128 MB. When more than 1 GB, it should be set
to 256 MB.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
DCT Unganged Mode (Enabled)
This item is used to select the DCT mode (DRAM Controller mode).
HDMI Audio (Enabled)
This item is used to enable or disable the NB HDMI audio support.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
Enabled
PCI
Enabled
Enabled
Disabled
Enabled
+/-/: Value F10: Save ESC: Exit
F9: Default settings
Using BIOS
35
Help Item
Options