Troubleshooting - ZyXEL Communications G-360 Quick Start Manual

Hide thumbs Also See for G-360:

Table of Contents

PROBLEM

Windows

Make sure the ZyXEL G-360 is inserted into the computer PCI slot

does not auto-

properly and then restart your computer. Check the LEDs on the

detect the

ZyXEL G-360.

Perform a hardware scan by clicking Start, Settings, Control Panel

and double-clicking Add/Remove Hardware. (Steps may vary

depending on the version of Windows).

Follow the on-screen instructions to search for the ZyXEL G-360

and install the driver.

Check for possible hardware conflicts. In Windows, click Start,

Settings, Control Panel, System, Hardware and then click Device

Manager. Verify the status of the ZyXEL G-360 under Network

Adapter. (Steps may vary depending on the version of Windows).

Install the ZyXEL G-360 in another computer. If the error persists,

you may have a hardware problem. In this case, you should contact

your local vendor.

C ertifica tions . F or more informa tion a bout your devices Decla ra tion of C onformity (DO C ) plea s e refer to www. z yxel. com

ZyXEL G-360 Quick Start Guide

Troubleshooting

CORRECTIVE ACTION

Table of Contents