Hardware Installation; Driver Installation - ZyXEL Communications G-360 Quick Start Manual

•
Windows 98 SE users may need the Windows 98 SE CD
If you install the Funk Odyssey Client software on the
computer, uninstall (remove) it.

2. Hardware Installation

Follow the steps below to install the ZyXEL G-360 in your computer.
1. Save your work and close all applications.
2. Turn off the computer and peripheral device(s), such as the printer. Then
disconnect the computer power cord from the power source.
3. Ground yourself by wearing an anti-static wrist strap or touching a metal
object. Remove the computer cover and the ZyXEL G-360 from its packaging.
4. Insert the ZyXEL G-360 into an available PCI slot. Make sure the ZyXEL G-
360's contacts are fully seated in the PCI slot.
5. Secure the ZyXEL G-360 to the computer with a bracket screw.
6. Attach the included antenna to the ZyXEL G-360. The antenna should be
perpendicular to the ground.
7. Replace the computer cover and power on your computer.

3. Driver Installation

Follow the steps for the appropriate version of Windows to install the ZyXEL driver.
ZyXEL G-360 Quick Start Guide
2