ZyXEL Communications P-661HW-D Series Support Note page 78

The SNMP related settings in P-661HW-D are configured in Web Configurator,
Advanced Setup, Advanced -> Remote MGNT -> SNMP The following steps
describe a simple setup procedure for configuring all SNMP settings.
Key Settings:
Option Descriptions
Enter the correct Get Community. This Get Community must match the
Get
'Get-' and 'GetNext' community requested from the NMS. The default is
Community
'public'.
Set Enter the correct Set Community. This Set Community must match the
Community
'Set-community requested from the NMS. The default is 'public'.
Enter the IP address of the NMS. The P-661HW-DHW-DX will only
Trusted
respond to SNMP messages coming from this IP address. If 0.0.0.0 is
Host
entered, the P-661HW-DHW-DX will respond to all NMS managers.
Enter the community name in each sent trap to the NMS. This Trap
Trap
Community must match what the NMS is expecting. The default is
Community
'public'.
All contents copyright © 2006 ZyXEL Communications Corporation.
P-661HW-D Series Support Notes
77