ZyXEL Communications P-661HW-D Series Support Note page 64

IP.
Global End
This is the ending global IP address (IGA).
IP
Type This is the NAT mapping types.
Here we'll guide you to configure Address Mapping Sets from Web
Configurator and CLI. (Since in Web Configurator we can only edit the rules
for Address Mapping Sets #1. The other Address Mapping Sets #2~8 can only
be configured in CLI)
• Now let's begin with Web Configurator:
Firstly let's come to Web Configurator, Advanced Setup, Network -> NAT ->
Address Mapping:
This menu is for Address Mapping Set #1, you can edit 10 Address Mapping
Rules for Set #1. You can edit or remove a rule by clicking the two buttons on
the rule table.
Click the 'Edit' Button on the rule #1, then you can enter the window in which
you can edit an individual rule and configure the Mapping Type, Local and
Global Start/End IPs:
All contents copyright © 2006 ZyXEL Communications Corporation.
P-661HW-D Series Support Notes
N/A
Many-to-One and
Server
63