Using Full Feature Nat - ZyXEL Communications P-661HW-D Series Support Note

5. Using Full Feature NAT

When P-661HW-D is in Routing mode, you can select NAT Option as Full
Feature in Network -> Remote Node -> Edit:
Key Settings:
Field
Network Address
Translation
Configuring NAT
Address Mapping Sets and NAT Server Sets
All contents copyright © 2006 ZyXEL Communications Corporation.
Options Description
When you select this option you can select
Full Feature Address Mapping Set Number 1~8 in the
pull-down menu on the right.
None
NAT is disabled when you select this option.
When you select this option, this remote node
will use default SUA Address Mapping Set.
You can see it in CLI by command 'ip nat
SUA Only
lookup 255'. It's a read-only sets with two
rules: Many-to-One and server mapping.
Select Full Feature when you require other
mapping types.
P-661HW-D Series Support Notes
61