Connect Two Ucm6510 Using Peer Sip Trunk; Create Peer Sip Trunk For Ucm6510; Figure 1: Sip Trunk - Create New Sip Trunk - Grandstream Networks Multiple UCM6510 IPPBX How To Interconnect

CONNECT TWO UCM6510 USING PEER SIP TRUNK

CREATE PEER SIP TRUNK FOR UCM6510

On the UCM6510-A web GUI, create a Peer SIP Trunk by navigating to PBX->Basic/Call Routes->VoIP
Trunks and click on "Create New SIP Trunk".
In the "Create New SIP Trunk" dialog:

Select "Peer SIP Trunk" for option "Type".

Enter a name to identify the trunk in option "Provider Name". This is mainly for reference purpose. In
this example "UCM-A" is used.

For option "Host Name" enter the IP address/domain of the other UCM6510 to be peered. In this case
1.1.1.1 is the IP address of UCM6510-A.

Click "Save" when done.

After clicking "Save" the new VoIP trunk will be displayed under PBX->Basic/Call Routes->VoIP
Trunks. Click on icon

Figure 1: SIP Trunk - Create New SIP Trunk

to edit the trunk.
How To Interconnect Multiple UCM6510 IPPBX Page 3 of 8