Grandstream Networks GXP – 2000 User Manual page 11

Figure 4: Getting Familiar with Keypad
RJ11
Table 6: GXP Button Definitions
Key Button
LINE1-LINE4
UP ↑
DOWN ↓
LEFT
RIGHT
OK
TRNF
CONF
MSG
MUTE/DEL
SPEAKER
HOLD
SEND
Grandstream Networks, Inc.
Hold Speaker Send/Re-Dial
Key Button Definitions
4 Line keys with LED, can be configured to different SIP profiles
Use button to select next "Menu Item" when phone is in keypad configuration
mode; Or increase handset/speakerphone volume when phone is ACTIVE; Or
increase ring volume when phone is in IDLE mode
U se button to select previous "Menu Item" when phone
m ode; Or decrease handset/speakerph
O r decrease ring volume when is in IDLE m
Shift cursor to left
Shift cursor to right
Enter Keypad Configuration "MENU" mode when phone is in IDLE mode. Use
as ENTER key when in Keypad Configuration.
TRA NSFER key: Transfer an ACTIVE cal
Press CONF button to connect Calling/Called party into conference
Ente r to retrieve (video) voice mails or other messag
Mute an active call; or Delete a key entry
Also used to 'REJECT' incoming call.
Enable/Disable hands-free speaker mode
Place ACTIVE call on hold
Press SEND to dial a new number or redial the last number dialed. Press
send button to send a call immediately before "no key entry timeout" value
expires
GXP-2000 Users Manual
Firmware 1.1.1.14
Adjustable LCD screen
Message Waiting Indicator
Line 1-4 Keys
Menu Keys
Mute/Delete
Message
Conference
Transfer
Speed Dial / Configurable
line indicators
Standard Keypad
is in keypad configure
one volume when phone is ACTIVE;
ode
l to another number
es
Last Updated: 12/2006
Page 11 of 33