Table of Contents
Advertisement
Action The "Action" column contains an icon that, when clicked, generates the
configuration screen of the particular device.
DNS Server
Domain Name System (
are translated into
the information provided by the
To manually configure
Server Addresses. Specify up to two different
mary, the other secondary.
IP Address Distribution
The "
Address Distribution" section of the Configure Network (Home/Office)
IP
screen is used to configure the Router's Dynamic Host Configuration Protocol
(
) server parameters.
DHCP
work devices. If enabled, make sure to configure the network devices as "
Clients." There are three options in this section: Disabled, DHCP Server, and
DHCP Relay.
Disabled Select this option if statically assigning
devices.
DHCP Server To set up the network bridge to function as a
1. Select DHCP Server.
2. Enter the
address at which the Router starts issuing addresses in the
IP
"Start
Address" text boxes. Since the Router's default
IP
192.168.1.1, the Start
3. Enter the end of the
es in the "End
4. Enter the subnet mask address in the "Subnet Mask" text boxes. The subnet
mask determines which portion of a destination
work portion, and which portion is the host portion.
Chapter 4 Using Network Connections
) is the method by which website or domain names
DNS
addresses. Specify such an address manually, according to
IP
.
ISP
server addresses, select Use the Following DNS
DNS
automatically assigns
DHCP
Address must be 192.168.1.2.
IP
address range used to automatically issue
IP
Address" text boxes.
IP
server addresses, one pri-
DNS
addresses to the network
IP
LAN IP
27
addresses to net-
IP
DHCP
server:
DHCP
address is
IP
address-
IP
address is the net-
Advertisement
Table of Contents
