Table of Contents
Advertisement
2. Select the Internet protocol to be blocked from the "Protocol" drop-down list.
3. If this rule will be active all the time, select "Always" from the "When should this
rule occur?" drop-down list. If the rule will only be active at certain times select
"Specify Schedule" and click Add. Then, add a schedule rule (for more details
about schedule rules, see the "Advanced Settings" chapter of this manual).
☞
Note: Make sure the Router's date and time settings for your
time zone are set correctly.
4. Click OK to save the changes. The Access Control screen will display a sum-
mary of the access control rule.
☞
Note: To block a service that is not included in the list select
"Specify Protocol" from the Protocol drop-down menu. The
"Edit Service" screen appears. Define the service, then click OK.
The service will then be automatically added to the top section
of the "Add Access Control Rule" screen, and will be selectable.
The user may disable an access control and the service made available without
having to remove the service from the Access Control table. This may be useful to
make the service available only temporarily, with the expectation that the restric-
tion will be reinstated later.
• To temporarily disable an access control clear the check box next to the ser-
vice name.
• To reinstate the restriction at a later time select the check box next to the
service name.
• To remove an access restriction from the Access Control table click the
Remove button for the service. The service will be removed from the Access
Control table.
☞
Note: When web filtering is enabled,
blocked by access control.
Actiontec Broadband Router User Manual
services cannot be
HTTP
18
Advertisement
Table of Contents
