Maintenance/Tr-069 - Grandstream Networks GXV3275 Administration Manual

On Onhook
Missed Call
On Connected
On Disconnected
DND On
DND Off
Forward On
Forward Off
On Blind Transfer
On Attended Transfer
On Hold
On Unhold
Log On
Log Off
On Register
On Unregister

MAINTENANCE/TR-069

Enable TR-069
ACS URL
ACS Username
ACS Password
Firmware Version 1.0.3.46
This is used to configure the event URL when the phone is onhook.
This is used to configure the event URL when the phone has new a
missed call.
This is used to configure the event URL when a call is established.
This is used to configure the event URL when a call is disconnected.
This is used to configure the event URL when DND is enabled.
This is used to configure the event URL when DND is disabled.
This is used to configure the event URL when the forward feature is
enabled on the phone.
This is used to configure the event URL when the forward feature is
disabled on the phone.
This is used to configure the event URL when users transfer a call with
blind transfer on the phone.
This is used to configure the event URL when users transfer a call with
attended transfer on the phone.
This is used to configure the event URL when users hold a call on the
phone.
This is used to configure the event URL when users resume a call on
the phone.
This is used to configure the event URL when users log on the phone
successfully.
This is used to configure the event URL when users log off the phone.
This is used to configure the event URL when an account in the phone
is registered successfully.
This is used to configure the event URL when an account in the phone
is unregistered.
It is used to set if the phone system will enable the "CPE WAN
Management Protocol" (TR-069). The default setting is "No".
It is used to configure the Auto Configuration Server's URI.
It is used to configure the username for the Auto Configuration
authentication.
It is used to configure the password for the Auto Configuration
authentication.
GXV3275 Administration Guide Page 90 of 117